Koch-Chemie Koch-Chemie Cutting Compound "H7.01" Sanding Polish (Coarse) 1000ml

Koch-Chemie Cutting Compound "H7.01" — Coarse Sanding Polish

The Koch-Chemie Cutting Compound H7.01 is a hard-hitting, coarse sanding polish built for the fast turnaround of badly weathered paint. With its heavy cut, it's the one you grab to pull out overspray, deep scratches and sanding marks down to P2000 grit. This compound runs a cut grade of 7.5 and a gloss grade of 3.0 — which makes it a must-have for pro detailers chasing maximum bite on paint correction.

• Knocks out paint defects fast: pulls out deep scratches, overspray and sanding marks down to P2000 grit.
• Heavy cut: with a cut grade of 7.5, this compound brings serious abrasiveness for badly damaged paint.
• Flexible to work with: you dial the cut up or down through pressure and your choice of polishing pad.

How and where to use it

The Koch-Chemie Cutting Compound H7.01 is a real all-rounder — it works for paint correction on cars, commercial vehicles and motorbikes. Thanks to its heavy abrasiveness, it really shines on paint that's taken a beating from the elements. Run it on a hard white or medium-hard yellow polishing pad at up to 2,000 rpm and you work the polish right into the paint. Depending on the result you're after, you vary the cut by adjusting pressure and speed.

How it cuts and finishes

For the best finish, go with a two-step process: start with higher pressure and low speed to get maximum bite. Then back off the pressure and step up the speed to perfect the finish. Wipe the residue off with a microfibre cloth, and clear any holograms or polishing marks with a high-gloss anti-hologram polish.

Quality sanding polish, no silicone oils

The H7.01 cutting compound is silicone-oil-free, so you can use it in a body shop without a second thought. That means trouble-free repainting — no silicone residue holding back the adhesion of fresh paint layers.